The sliding setpoint algorithm allows the controller to compensate for the disparate spatial distribution of daylight and electric light. By having two different setpoints for day and night, the target setpoint changes based on the current light level conditions. Additionally, the spectral response of the LS-301’s photodiode has been carefully tuned to match the photopic curve; the light perceived by the human eye. By sensing only visible light, the photosensor does not over-dim or under-dim. Together, these features result in a balanced contribution of electric light at all times, that adjusts subtly and is comfortable for occupants.
Watt Stopper/Legrand’s LS-301 makes the tasks of installation and commissioning simple. The photosensor is quick to install, and setup is a snap. All adjustments are made using an intuitive remote control, so there is no need for tools or ladders. An optional occupant remote control permits the automatic lighting level to be temporarily overridden, if needed, without changing the setpoints.
With the growth of interest in sustainable building practices, the opportunity to capture energy savings using automatic daylighting control has become widely recognized. The LS-301, which controls standard 0-10 VDC electronic dimming ballasts, can be used as one element of a green lighting design that minimizes energy use and keeps operating costs in check. The LS-301, and Watt Stopper/Legrand’s other innovative LightSaver® daylighting controls, may be combined with occupancy sensors or scheduled control in layered control strategies.
For more information about Watt Stopper/Legrand, visit www.wattstopper.com.