The device is the first of its kind to continuously select and display on and off setpoints. Typically, on/off closed loop control devices require multiple calculations of on and off setpoints during set up, adding complexity and cost to installation. The LS-102 continuously and automatically calibrates itself, eliminating the need for repeated manual calibrations to capture changing light levels as room reflectance levels change. This reduces burdensome setup requirements. “One of the greatest barriers to marketplace acceptance of automatic daylighting controls has been the difficulty in confidently establishing on/off setpoints to match an application,” says Watt Stopper/Legrand President Jerry Mix, adding “the automatic calibration technology in the LS-102 should help overcome this barrier.”
The company teamed with the California Lighting Technology Center (CLTC) in Davis, California to refine and verify the automatic calibration technology. CLTC Associate Director Konstantinos Papamichael emphasizes the importance of the technological advance, commenting, “Automatic, continuous calibration is key to successful photosensor based daylight harvesting controls, which are most important to reducing energy requirements and peak electricity demand.”
When ambient light levels exceed the off setpoint, the LS-102 will turn controlled lighting off. When the on setpoint is triggered, lighting turns back on. The device features other adjustable settings, including deadband and time delay settings. Users may also team the photosensor with a low voltage wall switch to enable manual override or utilize the sensor’s optional hold on capability. Ideal applications include indoor areas where natural light significantly contributes to overall light levels, such as perimeter offices, skylit areas, and warehouses.
For more information about Watt Stopper/Legrand, visit www.wattstopper.com.