This short video, produced by the Lighting Controls Association at the 2011 LIGHTFAIR event, introduces the building industry to a new indoor lighting control solution from GE Lighting Controls.
Schneider Electric has announced the availability of three new emergency lighting control solutions: the UL924 Emergency Lighting Control Relay, the UL924 Emergency Lighting Control Relay with Panel Mount, and the UL924 Emergency Lighting Dimmer Control. These emergency control devices enable building owners, managers, contractors and builders to implement the necessary emergency lighting in their facilities […]
This short video, produced by the Lighting Controls Association at the 2011 LIGHTFAIR event, introduces the building industry to Bantam, an 8-relay, all-in-one lighting control panel by PLC Buildings, a division of PLC Multipoint. The Bantam comes standard with 8 relays, 8 switch inputs, an astronomical clock and keypad programming. The panel also comes standard […]
This short video, produced by the Lighting Controls Association at the 2011 LIGHTFAIR event, introduces the building industry to Panasonic’s Full-2Way lighting control system, currently being used in thousands of installations throughout North America in commercial/industrial buildings, public schools and universities, hotels, hospitals/healthcare, transportation and more. The Full-2Way bus is a low-voltage, two-wire, topology free […]
Leviton recently announced its GreenMAX Relay Control Panels were chosen by Consulting-Specifying Engineer (CSE) magazine as the Best Product of the Year for lighting control products.
The GreenMAX family of relay control panels affords an industry-leading short circuit current rating (SCCR) of 25,000 Amps (at 277 VAC) for maximum service life, robust latching modules for incandescent and fluorescent loads, integrated dimming and switching capabilities along with daylighting – all in one energy-smart, cost-effective lighting management solution.
DCL Control Systems are now even easier to use, thanks to the new WTDCL Time Controller from Universal Lighting Technologies. With this user-friendly device, all programming, including basic configuration of the DCL system, is achieved by front-panel keystrokes. No computer or special commissioning tools are required.
By communicating with DEMANDflex high-efficiency ballasts over existing power lines, DCL eliminates the need for expensive re-wiring in existing buildings, and it lowers the time and expense of new construction. And now, the WTDCL Time Controller adds a new dimension of flexibility and simplicity in programming.
Leviton’s SECTOR™ Intelligent Ballast and Lighting Control System combines several energy-saving technologies–occupancy sensing, daylight harvesting and dimming–into one conveniently integrated system. This topology free system uses the same wiring type for all SECTOR™ components and accessories making it one of the easiest lighting control systems to install. To further simplify installation, all components are on a single bus, with accessories connected to the network, not the ballast. The SECTOR™ family of products provides a scalable solution that offers maximum flexibility and maximum coverage in any application–from a single room to a campus of buildings.
Zone5 Daylight Harvesting System by Hubbell Building Automation: A daylight harvesting system including occupancy sensors, daylight sensors and low voltage switches, to control 1 on/off and 4 variable lighting zones.
Dynalite Light Management System by Philips Lightolier: A scalable lighting and energy management system for a wide range of devices over a single platform.