The Lighting Controls Association is proud to announce the latest offerings in lighting controls from industry-leading manufacturers. Check them out!
Featured manufacturers:
Acuity Brands
Douglas Lighting Controls
Eaton Corporation
Leviton
Lutron Electronics
McWong International
RAB Lighting
Universal Lighting Technologies
ACUITY BRANDS
rCMSB – nLight® AIR Battery Powered Sensor
The rCMSB is a wireless ceiling-mount sensor designed to simplify your retrofit or new construction project and drive the lowest install cost. With no wires to install, simply mount it to the ceiling, pair it with nLight AIR switches and fixture-based controls via a mobile app, and you’re done. With its small size and new contemporary design, the rCMSB delivers a clean, consistent look across the ceiling, with a variety of lens options and both occupancy and daylighting capability built into one product.
Click here to learn more.
nLight® UNITOUCH™
The nLight® UNITOUCH™ is a modern and sleek touchscreen wall switch that provides seamless control of multiple luminaires and devices on the nLight Wired lighting controls platform. With the nLight UNITOUCH, one can control zones and scenes from a single interface that blends contemporary design with an enhanced user experience. Equipped with Bluetooth® Low Energy, the nLight UNITOUCH also allows users to control lighting through the myPersonify mobile application. The myPersonify app is an easy-to-use, intuitive tool that provides easy control of scenes and lighting directly from your mobile device when connected to an nLight® UNITOUCH.
Click here to learn more.
nLight® AIR Emergency Auto-Exit Feature
The nLight® AIR “EM” feature provides UL924 emergency operation via power interrupt, sending that luminaire into high-trim output for 90 minutes when a loss of power is sensed. With this latest enhancement, devices can exit the 90-minute override when a device in the same CLAIRITY™ Pro group has normal power restored. This eliminates the possibility of “nuisance lighting” following a power outage or initial power-on. All nLight AIR devices with the EM option support this feature from the factory, and any devices in the field can be updated for free using CLAIRITY Pro or SensorView.
Click here to learn more.
DOUGLAS LIGHTING CONTROLS
Intelligent Fixture Sensor and Intelligent Fixture Controller
The Douglas Bluetooth® Intelligent Fixture Sensors and Controllers enable networking of luminaires in the Douglas Bluetooth wireless lighting control ecosystem, which includes wall switches, sensors and load controllers. These Intelligent Fixture Sensors and Controllers install directly into industry standard ½ inch electrical knockouts and are intended for use with 0-10V LED drivers providing auxiliary power and DIM-to-OFF capability – like the Universal Lighting Technologies PWX series.
Click here to learn more.
EATON CORPORATION
Pow-R-Command Lighting Control
Pow-R-Command lighting control and plug load control panelboards integrate branch circuit protection and control (switching and dimming) in a single panelboard enclosure. Integrated architecture simplifies system design, reduces installation labor and saves 50% wall mounting space. Designed to meet ASHRAE and IECC code requirements, as well as California Title 24 energy efficiency codes, for networked lighting controls systems. Standard lighting panelboard mains configurations, sizes, electrical ratings and accessories are available.
Click here to learn more.
Z-Wave Plus Wireless Collection
Eaton’s Z-Wave Plus wireless collection of lighting controls include a wireless universal dimmer and accessory dimmer, wireless switch and accessory switch and a wireless duplex receptacle. In addition to the lighting controls, the wireless collection offers a motion sensor and an ON/OFF plug- in module. All devices feature Z-Wave Plus technology, that brings improved communication range, S2 security certification, lower power consumption and over- the- air updates in your home. When used with a compatible Z-Wave controller/ hub, these devices can also be controlled through voice assistants such as Amazon Alexa and Google Home.
Click here to learn more.
Universal Decorator Dimmer
Eaton’s universal dimmers are ergonomically designed and provide flicker- free dimming for seamless ambiance.
-
- Highly versatile: compatible with dimmable LED/CFL, INC, HAL, dimmable FLR, ELV, and MLV light sources
- Flicker- free dimming: latest technology enhances performance and delivers seamless dimming
- Flexibility: color change kits come with three color faceplates, offering design flexibility within one product.
Click here to learn more.
HUBBELL CONTROL SOLUTIONS
Bluetooth® WASP Sensor
The Bluetooth WASP Occupancy Sensor uses Bluetooth for remote programming, features Passive Infrared (PIR) motion sensing technology as well as ON/OFF and 0-10V dimming control with an integral light sensor to adjust the light level of the fixture when there is sufficient natural daylight. It provides ON/OFF and 0–10V dimming control with “From the Ground” programming using the new Hubbell Control Solutions controlHUBB mobile application. There are no dip switches on the new sensor. The passive infrared technology for the detection of motion consists of a quad element pyrometer and an interchangeable spherical Fresnel® lens designed specifically for high or low mount applications (available separately).
Click here to learn more.
LEVITON
MX Downlighting with beam Wireless Optical Control
From Intense Lighting by Leviton, MX Downlighting with beam Wireless Optical Control gives users a dynamic tool to personalize environments. This award-winning technology, integrated into the Leviton MX family, allows for dynamic light shaping from narrow spot to flood, all controlled from an iOS or android mobile device using Bluetooth® wireless technology. A proprietary power control interface with 0-10V allows for wireless BLE dimming capability. Additionally, cloud based connectivity provides users the ability to save user profiles and create templates to share across luminaires.
Click here to learn more.
GreenMAX DRC
The GreenMAX DRC room control solution uses wired LumaCAN networking for communication between devices and wireless Ethernet for configuration and backbone connectivity. The Bluetooth-enabled app can be used to configure and modify system preferences, group and scene settings, daylighting behaviors and more. Fully encrypted for security and secure communication with multiple levels of user privilege and controlled user access, the system is not dependent on internet connectivity for operation or configuration. Additionally, it can be used to comply with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 multi-level, occupancy/vacancy sensing, partial-ON, partial-OFF, daylighting, demand response and receptacle control requirements.
Click here to learn more.
LUTRON ELECTRONICS
T-Series Downlight Driver
Lutron’s T-Series downlight driver makes specifying tunable white easier than ever. Tunable white drivers allow users to change the look and feel of a space simply by changing the color temperature of the lighting. From warm amber tones to cooler blues, tunable white light can be programmed over time to shift color temperature throughout the day – paralleling the changes in sunlight itself. Such flexibility also empowers designers to deliver the next level of human centric design, enhancing occupant comfort and well-being, and ultimately resulting in a positive effect on people. This new addition to the previously launched linear driver expands T-Series options to almost any fixture type – offering a vibrant, human centric solution for a wide variety of architectural spaces.
Click here to learn more.
McWONG INTERNATIONAL
TruBlu™ Bluetooth-DALI Wireless Fixture Controller (PSC-ZAD-WCM-100/110-SR)
The TruBlu™ Bluetooth-DALI Controller “future-proofs” lighting by pairing Bluetooth connectivity + DALI networks, ensuring robust DALI & smartphone-based control now with easy access to next-generation driver or DALI functionality. Features include ON/OFF, dimming & color tuning, integrated photocell, asset management & tracking. It provides real-time energy reporting and wireless access to DALI 2.0 LED driver operational data (i.e., hours of operation, thermal conditions). Compatible with the industry-standard Zhaga Book 18 receptacle, it is IP65 rated for broad applicability indoors or out.
Click here to learn more.
Broad Range DC Output LEM Emergency Drivers Series
The broad range DC output LEM series is a UL-Listed and CEC-compliant constant power LED emergency driver family, designed for both AC LED tube/bulb and DC LED loads. They offer best‐in‐class low profile form factors, with options for terminal block, flex conduit or IP66 waterproof case. Units feature constant emergency power output, with a wide range of output voltage from 5VDC – 300VDC and auto-adjusting output current. The devices deliver 90 minutes of emergency operating time over their full temperature range 0-55℃ (32°F-131°F) and a 24-hour maximum battery recharge time. All models are UL924 rated and feature a 5-year warranty.
Click here to learn more.
RAB LIGHTING INC.
Lightcloud Smart Outlet
A controls category and Technical Innovation Award winner in the 2020 LIGHTFAIR Product Innovation Awards, the Lightcloud Outlet is a tamper resistant duplex receptacle that delivers plug-load control and measured power monitoring for loads up to 20 amps. The bottom receptacle is always on, and the top receptacle can be controlled manually (App, Touch, or local Dimmer), schedules, occupancy/vacancy/daylight sensors, or advanced automations such as variable control throughout the day. Energy usage can be viewed from the Lightcloud Web App or exported to PDF or CSV. The Outlet is compatible with all Lightcloud systems and extends the range of the Lightcloud wireless mesh. The Lightcloud Outlet has energy meters for each receptacle for precision power monitoring and energy savings across controlled and always-on receptacles. Energy data and insights are available through the intuitive, cloud-based Web App.
Click here to learn more about Lightcloud.
SYNAPSE WIRELESS, INC.
Sense 4-20
The Sense 4-20 enables you to bring the power of the latest IoT technology into older facilities and equipment . Because it is both wireless and battery powered, it is cheap and easy to install in an industrial facility without incurring conduit or electrician costs. It can take any 4-20 mA sensor input and send that data, using our smart lighting network, to our cloud solution for analytics and visualization. With the Sense 4-20 you can instrument any piece of equipment quickly and at a low cost, gaining insight into how that machine is functioning and how much energy it is using. Lighting networks are typically limited to photocell or motion sensors, but the Sense 4-20 enables integration of other sensors, such as temperature, humidity, vibration, etc. into an existing SimplySNAP network, expanding energy management tools.
Click here to learn more.
UNIVERSAL LIGHTING TECHNOLOGIES
EVERLINE Vapor Tight Slimline
Universal’s EVERLINE® Vapor Tight is ideal for unforgiving lighting environments. These durable LED fixtures have UV Resistant Polycarbonate housing and lens which protects the light source and electronics from water, vapor and contaminants. This fixture is great for commercial buildings, parking garages, food service facilities, and utility areas.
Click here to learn more.
Leave a Reply