Hubbell Building Automation, Inc. recently announced the introduction of the 480V version of the wiHUBB On-Fixture Module (OFM).
A control component of the popular wiHUBB® Wireless Lighting Control System, Hubbell Building Automation’s wiHUBB On-Fixture Module (OFM) is a self-contained intelligent wireless control module that provides On/Off lighting control for outdoor fixtures. Each OFM contains an integrated daylight sensor that can be used to turn lighting ON or OFF for that specific fixture based on the amount of natural light available. Each wiHUBB On-Fixture Module can be individually controlled or grouped with other wiHUBB devices. The wiHUBB OFM communicates via 900MHz radio frequency to other devices within the wiHUBB wireless self-organizing and self-healing mesh network.
This wiHUBB control component is now available in both 120-347VAC 50/60Hz and 480VAC 50/60Hz for higher voltage applications. The higher voltage version of the OFM is ideal for retrofit lighting control applications of parking lot and site lighting that currently run 480V power. The OFM provides individual fixture control without the need to rewire and change out the existing power service. The wiHUBB OFM has an operating temperature of -40°C to +90°C (-40°F to 194°F), is protected from the environment by a GSM UL Rated 94 HB smoked plastic housing, and can be installed into any standard twist lock photo-cell receptacle for easy retrofit. The wiHUBB OFM is FCC Certified, IC Approved, conforms with UL916, and comes with a five-year limited warranty.